*Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

*Standard coil length is 100 ft. Cut coils available; charges apply - call for details.

- Metering Pumps
- Robotics
- Computer Disc Drive Equipment
- Insulating Sleeves
- Small Motor Fuel Lines
- Vacuum Equipment
- Pressure Measuring Devices
- Oxygen and Gas Lines
- Transfer Lines for Clean Liquids
- Instrumentation
- Pneumatic Control Systems
- Hydraulic Control Systems

- Automotives
- Fluid Circuitry
- Sensing Systems
- Grease & Lubrication Lines
- Fluid Feeds
- Air Tools
- Oil & Fuel Lines
- Cement Slurries
- Petroleum Products Transfer
- Abrasive Powder Transfer
- Agriculture
- And More

- Open mesh polyester braiding incorporated in wall of flexible, clear,
  ether-based polyurethane
- Greater pressure capability than unreinforced polyurethane tubing
- Resistant to weathering, tearing. impact, abrasion, radiation exposure, oils,   greases, and fuels
- Superior hydrolytic stability
- Wide range of temperature resistance : -90°F to 201°F
- Contains no plasticizer. which can migrate and cause flow contamination or   tube hardening
- 100% incinerable
- Approved by Scientific Ecology" Group (S.E.G.) for transfer of contaminated   and clean liquids

Polyurethane combines the best properties of both plastic and rubber. It offers abrasion and tear resistance, high tensile and elon­gation values, and low compression set. Polyurethane is naturally flexible and exhibits virtually unlimited flexural abilities.

UREBRADE is supplied in an ether formulation. making it resistant to attack from moisture and fungus. Where applications involve repeated flexing, heavy vibration, or abrasion, UREBRADE offers superior service life over other materials. It also resists attack from ultra-violet rays. making it acceptable for outside use. Ester-based UREBRADE is available through minimum order (call for details).

Combining good chemical resistance with excellent weathering characteristics sets polyurethane apart from most other thermoplas­tics. It has exceptional resistance to most gasolines, oils, kerosene, and other petrole­um-based chemicals, making it an ideal choice for fuel lines (some additives in today's gasoline and petroleum products warrant field testing).