*Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Click on table to enlarge view

*Limited stock item; lead times and minimums may apply - call for details.
Superthane ET material is NSF approved. Cut coils are available from coils of 100 ft. or less; charges apply - call for details. Coils over 100 ft. are sold by standard coil length only.
Tolerances: ID & OD 3% but not less than 0.06".

ES: Clear Ester formulated Polyurethane Tubing
ET: Clear Ether formulated Polyurethane Tubing

- Metering Pumps
- Robotics
- Computer Disc Drive Equipment
- Insulating Sleeves
- Small motor fuel Lines
- Vacuum Equipment
- Pressure Measuring Devices
- Oxygen and Gas Lines
- Nuclear Power Facility Uses
- Transfer Lines for Clean Liquids
- Instrumentation
- Pneumatic Control Systems
- Hydraulic Control Systems
- Automotives
- Fluid Circuitry

- Sensing Systems
- Grease & Lubrication Lines
- Automated Machinery
- Fluid Feeds
- Air Tools
- Oil & Fuel Lines
- Cement Slurries
- Petroleum Products Transfer
- Abrasive Powder Transfer
- Lubricated Air Feeds
- Well Pipe & Cable Jacket
- Granular Transfer
- Agriculture
- And More

- Available in both Ester and Ether formulations
- Clear, flexible. resilient, tough, resistant to oils, greases and fuels
- Resistant to weathering, tearing, impact, radiation and abrasion
- SUPER PUR ES has a wide range of temperature resistance: -95°F to 185°F
- Contains no plasticizer that can cause flow contamination or tube hardening
- Can be heat sealed, coiled, fabricated or bonded
- 100% incinerable SUPERTHANE ET is approved by Scientific Ecology Group   (S.E.G.) for the transfer of contaminated and clean liquids

SUPER PUR ET is recommended for hydrolytic stability (resistance to moisture and fungus). Approved by the National Sanitation Foundation (NSF 51), SUPERTHANE ET also resists attack from ultraviolet rays, making it a good material for outside use. (Note: Ester polyurethane does not react well with water, prolonged humid conditions, or attack from fungus.)

SUPERTHANE is more resistant to pressure and vacuum applications than correspond­ing sizes of PVC or rubber. When used with Thermobarb fittings or Snapflex barbed fit­tings. SUPERTHANE will not require clamps, provided that working pressures remain at or below 105 psi at ambient temperature.

Combining good chemical resistance with excellent weathering characteristics sets polyurethane apart from most other thermo­plastics. It has exceptional resistance to most gasolines, oils. kerosene, and other petroleum-based chemicals, making it an ideal choice for fuel lines (although some additives in today's gasoline and petroleum products warrant field testing).