*Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

- Silicone elastomer meets USP class VI requirements
- Manufactured under Good Manufacturing Practices (GMP) in a   controlled environment
- Reusable - will withstand repeated sterilization
- Non-reactive to body tissues and fluids
- Translucent natural color for usual contact with the flow
- Odorless, tasteless, and inert
- All ingredients are non-toxic and FDA sanctioned for use with food
  contact surfaces
- Radiopaque tubing available with minimum runs

S-CON MD tubing surface properties resist sticking and encrustation, and will not support bacteria growth. The tubing is soft, pliable, and contains no plaslicizers which could leach out. causing f low contamination or tube hardening.

Radiopaque tubing can be supplied with the Barium Sulfate opaquing agent, either fully dispersed throughout the tubing, co-extruded as striping on the outer surface, or fully encapsulated within the wall.

Peroxide-cured S-CON MD tubing is supplied in individual, non-sterile, heat-sealed poly-bags and should be sterilized prior to use.

If tubing is exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax, become gummy, and should be replaced.

Note: S-CON MD is not recommended for implant or in-body uses. Care is recom­mended in the selection and application of Fittings and clamps. Sharp, barbed fittings or unlined metal clamps could tear into the tubing wall.