*Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Sold by standard length only (25 ft.).

*Burst pressures can be expected to decrease by at least 20% for each 200 ° F increase up to
350° F.

- Medical & Dental Equipment
- Pharmaceutical Processing
- Laboratory Uses
- Insulation Sleeving
- Thermal Protection
- Computers
- Appliances
- Food Handling
- Beverage & Dairy Service
- Duplicating Equipment
- Gaskets, Seals & O-Rings
- Hot Fill & Vacuum Systems
  Stirring Vessels

- Fermenter Lines
- Liquid Resin Feeds
- Viscous Material Handling
- Peristaltic Pumps
- Adhesive Line
- Sterile Bottle Filing
- Surgical Drains
- I.V. Administration
- Blood & Biological Fluid Handling
- Dialysis
- Clean Rooms
- Cell Culturing
- Vaccine Transfer

- Open mesh polyester braiding incorporat­ed within the walls of
   silicone tubing
- Silicone elastomer meets USP class VI requirements
- Translucent natural color for visual contact with the flow
- Able to resist extreme temperature variation: -80°F to 350°F
- Odorless, tasteless, and inert
- All ingredients are non-toxic and FDA-sanctioned for use with food   contact surfaces

The SILBRADE MEDICAL hose is made of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Lot traceability, are applicable to all Class VI ingredients.

The hose's smooth bore, coupled with its resistance to allow material to adhere to the tube wall, facilitates easy cleaning and system purging. SILBRADE MEDICAL may be low-pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax, become gummy, and should be replaced.

The peroxide-cured SILBRADE MEDICAL hose is supplied in individual, non-sterile, heat-sealed poly-bags and should be sterilized prior to use.

Note: SILBRADE MEDICAL is not recom­mended for implant or in-body uses. Care is recommended in the selection and application of fittings and clamps. Sharp, barbed fittings or unlined metal clamps could tear into the hose wall and cause possible failure, especially at elevated pressures.

The Excelon Tube Snip Cutter easily makes clean, smooth cuts and works well with Silbrade Medical silicone hose. Also available, Excelon Tube Snip Cutter Replacement Blades (Part No:RF38000)