Flange Former System

Flange Former System

SPS Flange Former allows complete portability to produce sanitary Tri-Clamps*/flanges at any location in the plant. These components complement or replace stainless steel, glass or industrial plastic piping systems. Rigid sanitary tubing features smooth bore construction, assuring smooth product flow and no crevices.

SPS Flange Former Systems are used with:
- PVDF

- ECTFE

- polypropylene

- high-density polyethylene, and

- Clear PVC tubing in diameters ranging from 3/4 through 2-inch (19.0- through 50.8-mm) sizes. Sanitary Flanges will not corrode, pit or rust. They meet or exceed food-grade, USP Class VI, USDA and 3A standards.

For the complete line of rigid systems and components, refer to the Rigid Systems Section.

- On/Off switch

- Red indicator light

- Automated timer (multi-head)

- Carrying handle

- Snap rings

- Snap ring gauge (multi-head)

- Temperature control regulator (multi-head)

- Power: Available in 110 volt/60 cycles or 220 voll/50 cycles, 15 amps


EQUIPMENT SPECIFICATIONS

MULTI-HEAD
Produces flange for 3/4 to 2-in. tubing sizes

Height, in./mm: 15.25/387.35
Width, in./mm: 22.25/565.15
Depth, in./mm: 14.25/361.95
Weight, lbs./kg:23.75/10.77
Heat: Variable
O.D. Sizes, in.: 3/4, 1, 1-1/2, 2
O.D. Sizes, mm: 19.0, 25.4, 38.1, 50.8

FEATURES
- On/Off Controls
- Warning Light and Alarm
- Time/Temperature __ Indication Switch

SINGLE-HEAD
Produces flange for3/4 - or 1-in. tubing sizes only

Height, in./mm:12.5/317.5 (lever up)
Width, in./mm: 18/457.2
Depth, in./mm: 12/304.8
Weight, Ibs./kg: 14.85/6.73
Heat: 695°F (350°C)
O.D. Size, in.: 3/4, 1
O.D. Size, mm: 19.0, 25.4

FEATURES
- Power Coble
- Locking Clomp

The metric dimensions listed above are provided as a reference only. These products are not metrically sized.